• Deutsch
  • English
  • Polski

Suction flushing vehicle with water recycling (WRS 1)

Rinsing and suction with continuous water treatment

In no less than 8 levels, the wastewater is cleaned and treated and the rinsing continuously supplied again.

This enables trouble-free operation, without additional water refueling. The large capacity and the recording option itself severe mudslide make the WRS 1 is particularly economical.

■ Pipe cleaning, hydrodynamic
■ sewer cleaning, hydrodynamic
■ Duct cleaning (continuously) with water treatment (recycling)
■ surface cleaning
■ container interior cleaning
■ Industrial cleaning

■ emptying by freewheel
■ Emptying by pressure by the vacuum pump
■ emptying by pnematischen emptying piston (exhaust piston)
■ multi-chamber system (optional)
■ Combination operating suction and high-pressure rinsing
■ variable water chamber

■ Sludge compartment size: according to customer requirements
■ up to 20,000 liters of air volume
■ mud chamber: cylindrical,
■ material: steel or stainless steel
■ Version with fully openable closure bottom
■ water chamber vorgebaut in the container, the cylinder space or a lateral water bags
■ content display on tube sight glass or float indicator with scale

■ To open over the full cross section
■ Execution in dished form
■ Material: steel or stainless steel
■ Hydraulic opening upwards
■ closure bottom lock operated as a central pneumatic, hydraulic or manually

■ vacuum pump manufacturer as desired (for example, Make: CVS, Gardner Denver Wittig, SIHI, Jurop, Samson, etc.)
■ Number: 1 or 2 pieces
■ Suction: up to 4000 m3 / h
■ drive mechanically or hydraulically from the power take-off of the chassis or via a separate motor
■ Optional: suction hose, boom, boom box or cassette

■ Suction hose cartridge or
■ Injection hose-reel or
■ telescopic boom or
■ Suction hose with telescopic boom or
■ Suction hose with swivel head or boom
■ simultaneous boom

■ high-pressure pump, manufactured as desired (URACA, Hammelmann, bacon, Woma, Kamat, Pratissoli etc.)
■ Number: 1 or 2 pieces
■ flushing: up to 600 liters / minute to 400 bar
■ pneumatic pressure control valve,
■ Pressure speed controller
■ Drive from PTO of the truck or via a separate motor

■ Large high pressure rinsing reel with infinitely variable hydraulic drive in both directions
■ Large high pressure rinsing reel fixed or swivel mounted on the closure floor or boom, partially telescopically
■ Large high pressure rinsing reel On the Sets for high-pressure hose DN 19, DN 25, DN 32, DN 38, up to 360 m, in special order up to 500 m
■ Small high-pressure rinsing reel hydraulically or manually, designed for 40 to 120 m high pressure hose DN 13

■ continuously automatically operating water treatment
■ by continuous suction flushing on site
■ elimination of trips Zurm freshwater tanks
■ 8-stage water purification system through deposition, coarse filter, pre-filter, dirt water pump, cyclones, cascade, sedimentation tanks etc.

■ Logo control
■ CAN-BUS control
■ Print speed control
■ Remote Control,
■ Central operating platform in stainless steel housing

■ Outlet apron made of aluminum or stainless steel
■ Toolboxes or hose troughs, left and right at the building, made of aluminum or stainless steel sheet
■ Additional toolbox
■ high-pressure / Sewer
■ Water shortage warning system,
■ Draining Residual Water
■ vise
■ spray gun / spray lance
■ Halogen work lights
■ etc.

■ air compressor
■ hydraulic winch
■ Rear View Camera
■ Meterzähleinrichtung
■ heated wardrobe
■ Fully enclosed
■ Hand wash cold water or cold / hot water
■ billboards
■ Odor neutralization plant
■ Deep suction device
■ Winter Heating
■ Anti-aerosol
■ nozzle set
■ etc.

■ Pneumatic piston
■ Drag piston
■ Rear tilt

Diese Website verwendet Cookies. Durch die Nutzung unserer Dienste erklären Sie sich damit einverstanden, dass wir Cookies setzen. Hier erfahren Sie alles zum Thema Datenschutz & Cookies